EasyManua.ls Logo

Philips EP 800 Series - Deactivate AquaClean Reminder; Disable Button Beeping Sound; Reset Drink Settings

Philips EP 800 Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Philips EP Series
Deactivate AquaClean lter reminder
If you would like to deactivate or turn o the AquaClean lter reminder on your Philips 1200/2200/3200
espresso machine, follow the steps below.
1. Switch OFF the machine
2. Press and hold the AquaClean button for 3 seconds until the AquaClean icon light is on and the start/
stop button starts blinking
3. Press the start/stop button again to turn o the AquaClean icon light
4. Your AquaClean lter reminder is now deactivated
Note: Once deactivated, you will not receive any notication after you descale your machine. If you wish to
use AquaClean lter in the future, can activate it again by pressing the AQ lter icon for 3 seconds
Deactivate the beeping sound of the buttons
It is possible to deactivate the beeping sound, please follow the instructions below:
1. Press the ON/OFF button to switch OFF the machine
2. Press and hold the Coee icon (or Espresso Lungo icon for Philips EP3221 model) for 3 seconds
3. The x1 cup light of the Coee icon is light up and START/STOP light starts to blink. This indicates that the
sound setting is set to ON.
4. Press the Coee icon again to switch the x1 cup light icon o. The sound setting is now set to o.
5. Press the start/stop button to save the setting
6. Press the ON/OFF button to switch the machine back ON.
Note: Deactivating the beeping sound is not possible for the on/o button and the start/stop button
Reset drinks settings to default setting
1. Switch OFF the machine
2. Press and hold the Espresso icon for 3 seconds
3. The screen will show the default settings on the aroma strength/pre-ground coee icon, drink quantity
icon, milk quantity icon (specic models only), coee temperature icon (specic models only)
4. Start/stop button will start to pulse, indicating that the settings are ready to be restored
5. Press the start/stop button to conrm you want to restore to the default settings
6. Press the ON/OFF button to switch the ON again
Functions/features explanation

Related product manuals