EasyManua.ls Logo

Philips EP 800 Series - Wi-Fi Connectivity Setup

Philips EP 800 Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Philips EP Series
How to check connectivity board (Only for Wi-Fi models).
Connecting to Wi-Fi
For a connected experience, you have to connect your coee machine to your Wi-Fi network with the
free Coee + app. You can download the free Coee + app* for iOS® or Android™ from the App Store
or from Google Play. Follow the instructions in the app to connect your coee machine to your Wi-Fi
and to pair your coee machine with the Coee + app. In this user manual you can nd step-by-step
instructions for setting up the Wi-Fi connection (see ‘Setting up the Wi-Fi connection for the rst time’).
*The app may not be available in your country.
Wi-Fi connection
Setting up the Wi-Fi connection for the rst time
Connect your coee machine to a 2.4 GHz 802.11 b/g/n home Wi-Fi network.
Connecting your coee machine to your home Wi-Fi network, provides you with an enhanced user
experience.
1. Make sure that you have the password of your Wi-Fi network at hand before you start the Wi-Fi
set-up process and that your smartphone or tablet, the coee machine and the Wi-Fi router are
within range of each other.
2. Download the Coee + app on your smartphone or tablet from the App Store or from Google Play.
3. Fill the water tank of your coee machine with fresh water and place it back into the machine.
4. Make sure that when you start the Wi-Fi set-up process, your smartphone or tablet is connected to
the same Wi-Fi network that you want to connect your machine to.
5. Follow the instructions in the app to pair your smartphone or tablet with the coee machine and
connect your coee machine to your Wi-Fi.
6. When the Wi-Fi light on the user interface of the coee machine lights up continuously, and the app
shows that the machine is connected, the Wi-Fi connection has been successfully established.
- You can check if Wi-Fi installation has been established successfully by checking the connection
status in the app and by switching the machine on and o in the app. If the Wi-Fi light stays o
or keeps ashing, you can check the troubleshooting section in this booklet to nd a solution.
You are now ready to start your connected experience.
If the network has changed and the connection needs to be re-established, perform the setup again
(see ‘Changing the Wi-Fi connection’).
This app supports the latest versions of Android™ and iOS®. Please check the App Store or Google
Play for the latest update of supported operating systems and devices.
The Wi-Fi setup process can be cancelled in the app or by exiting the app.
To be able to switch your coee machine on and o with the app, the smartphone or tablet with the
app must be connected to the same Wi-Fi network as your coee machine.
Technical information

Related product manuals