Philips EP 800 Series - Gear Motor Removal; Boiler Removal; Flowmeter Removal

26
Philips EP Series
Removal of the Gear motor
. Take out the brew unit motor cover removing the  screws
Be aware there is an empty hole (in the red circle). Do not insert any screw inside
Removal of the Boiler
. Remove all the electrical and water circuit connections
. Take out the  screws from the boiler support.
Removal of the Flowmeter
. Remove the electric connection
. Press on the holder to pull out the owmeter, then remove water connections.
Disassembly - and Reassembly advice