Steam out
The Steam Out feature is available in the Test Mode.
The machine enters in Test Mode by pressing in sequence K, K, K, K in the rst two seconds
after switching on the machine by mean of the main switch on the backside of the CA.
There are dierent levels, in each level the coee-machine can execute dierent commands.
The Steam Out command is available in the Level .
The user can switch the level by pressing the Button K.
Legend:
(O) = Orange
(B) = Blu
(R) = Red
(G) = Green
(W) = White
At the start up all loads are turned o. The software allow to have multiple loads active at the same
time.
TEST MODE Level1
Pressing button Stand-By Pressing button Stand
TEST MODE Level2
Functions/features explanation
To Next Page
Loading...
