Philips EP 5400 Series - Special Functions: Reset Error Log


Sequence of
actions by user
Reaction of the appliance
PASS FAIL Cause of failure Solution
Grinder
Press and release
K to toggle the
Grinder. If it was
ON, then will be
OFF.
• L OFF in UI panel +
• BoxK OFF in Display +
BoxT Green in Display +
BoxT Green in Display
• The grinder is stop.
The grinder is still
rotating.
The drive of the
Grinder in the Main
is damaged
Change Main
Board
Special functions. Use it only if proper trained.
Reset Error Log
Keep release
K for more
than  sec. to
toggle Reset the
Error Log.
• BoxK Green in Display +
N.B: The other BoxTx are not
relevant
Test mode