9 EN
Determine the status based on the wireless
subwoofer indicator.
LED behavior Status
Fast blink Subwoofer in pairing mode
Constant on Connected / Pairing
successfuly
Slow blink Connecting / Pairing failed
Note
• Do not press the CONNECT (Connect) button
on the rear of the subwoofer, except for manual
pairing.
Manual pairing
If no audio from the subwoofer can be heard,
manually pair up the subwoofer.
1 Unplug both the main unit and the
subwoofer from the mains sockets, then
plug them in again after 3 minutes.
2 Press and hold the CONNECT (Connect)
button on the rear of the subwoofer for
5 seconds.
» The indicator on the subwoofer blinks
quickly.
3 Press and hold
on the main unit or
remote control for 5 seconds to switch
the main unit to Eco standby.
4 Press
on the main unit or remote
control to switch the main unit on.
» The indicator on the subwoofer blinks
white quickly and SBW PAIRING
displays on the display panel.
» If the pairing succeeds, the indicator
on the subwoofer lights up white and
SBW PAIRED displays on the display
panel.
5 If the pairing fails, the indicator on the
subwoofer blinks slowly and CHK SBW
displays on the display panel. Repeat
the steps above.
Option 2: Connect audio through
an analog audio cable
AUDIO OUT
RL
1 Using an analog cable, connect the
AUDIO IN connector on this product to
the AUDIO OUT connector or analog
audio output connectors (red and white)
on TV or other devices.
2 Repeatedly press the source button until
AUDIO IN displays on the display panel.
Connect to power
• Before connecting to the AC power cord,
make sure that you have completed all
other connections.
• Risk of product damage! Make sure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the main unit.
• Connect the mains cable to the DC socket
of the main unit and then into a mains
socket.
• Connect the mains cable to the AC~ socket
of the subwoofer and then into a mains
socket.
Pair up with the
subwoofer
Automatic pairing
The wireless subwoofer automatically pairs
up with the main unit for wireless connection
when you turn on the main unit and the
subwoofer.
9 EN
Determine the status based on the wireless
subwoofer indicator.
LED behavior Status
Fast blink Subwoofer in pairing mode
Constant on Connected / Pairing
successfuly
Slow blink Connecting / Pairing failed
Note
• Do not press the CONNECT (Connect) button
on the rear of the subwoofer, except for manual
pairing.
Manual pairing
If no audio from the subwoofer can be heard,
manually pair up the subwoofer.
1 Unplug both the main unit and the
subwoofer from the mains sockets, then
plug them in again after 3 minutes.
2 Press and hold the CONNECT (Connect)
button on the rear of the subwoofer for
5 seconds.
» The indicator on the subwoofer blinks
quickly.
3 Press and hold
on the main unit or
remote control for 5 seconds to switch
the main unit to Eco standby.
4 Press
on the main unit or remote
control to switch the main unit on.
» The indicator on the subwoofer blinks
white quickly and SBW PAIRING
displays on the display panel.
» If the pairing succeeds, the indicator
on the subwoofer lights up white and
SBW PAIRED displays on the display
panel.
5 If the pairing fails, the indicator on the
subwoofer blinks slowly and CHK SBW
displays on the display panel. Repeat
the steps above.
Option 2: Connect audio through
an analog audio cable
AUDIO OUT
RL
1 Using an analog cable, connect the
AUDIO IN connector on this product to
the AUDIO OUT connector or analog
audio output connectors (red and white)
on TV or other devices.
2 Repeatedly press the source button until
AUDIO IN displays on the display panel.
Connect to power
• Before connecting to the AC power cord,
make sure that you have completed all
other connections.
• Risk of product damage! Make sure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the main unit.
• Connect the mains cable to the DC socket
of the main unit and then into a mains
socket.
• Connect the mains cable to the AC~ socket
of the subwoofer and then into a mains
socket.
Pair up with the
subwoofer
Automatic pairing
The wireless subwoofer automatically pairs
up with the main unit for wireless connection
when you turn on the main unit and the
subwoofer.
To Next Page
Loading...
