19 EN
8 Product
specifications
Note
• Specications and design are subject to
change without notice.
Amplier
• Total output power:
808W MAX / 410W RMS (1%THD)
• Frequency response (main unit): 150Hz-
20kHz
• Frequency response (Subwoofer): 35Hz-
150Hz
• Signal-to-noise ratio:
>65 db(CCIR) /(A-weighted)
Audio
• S/PDIF Digital audio input:
• Optical: TOSLINK
Bluetooth
• Bluetooth prole: A2DP
• Bluetooth version: 4.2
• Frequency band/Output power: 2402
MHz ~ 2480 MHz / d 2dBm
Wi-Fi
• Wi-Fi IEEE 802.11 a/b/g/n
• Frequency band: 2.412 - 2.472 GHz,
5.18 - 5.32GHz, 5.50 - 5.70GHz, 5.745 –
5.825GHz
• Radio frequency power transmitted: WiFi
2.4G: 17.6dBm; WiFi 5G: 16.38dBm; WiFi
5.8G: 8.07dBm
Main unit
• Power supply: Model (Philips branded AC
power adapter): NSA120EC-19063200
• Input: 100-240 V~, 50/60 Hz, 2.0 A
• Output: 19 V 6.32 A
• Power consumption: 25 W
• Standby power consumption: <0.5 W
• Audio channel: 5.1.2
• Built-in speakers:
• Central: 2 racetracks full range drivers
• Front speaker: 4 full range drivers +
2 tweeters
• Up-ring: 2 full range drivers
• Side-ring: 2 tweeters
• Dimensions (W x H x D):
1049 x 120 x 55.6 mm
• Weight: 4.07kg
• Operating temperature: 0°C - 45°C
Subwoofer
• Power supply: 220-240 V~, 50/60 Hz
• Power consumption: 20 W
• Standby power consumption: <0.5 W
• Speaker driver: 1 x 8” subwoofer
• Impedance: 3 ohm
• Dimensions (W x H x D):
400 x 230 x 407 mm
• Weight: 9.6kg
• Operating temperature: 0°C - 45°C
Audio codec format
• HDMI: Dolby Digital, Dolby Digital plus, Dolby
Digital EX, Dolby TrueHD, Dolby Atmos, DTS,
DTS 96/24, DTS-ES, DTS Digital Surround
(5.1-ch), DTS-HD High Resolution Audio,
DTS-HD Master Audio, DTS ES, DTS: X, IMAX
Enhanced
• HDMI eARC: Dolby Digital, Dolby Digital
plus, Dolby Digital EX, Dolby TrueHD, Dolby
Atmos, DTS, DTS 96/24, DTS-ES, DTS Digital
Surround (5.1-ch), DTS-HD High Resolution
Audio, DTS-HD Master Audio, DTS ES, DTS: X
• Optical: Dolby Digital, Dolby Digital plus, LPCM
2ch
• Bluetooth: SBC
• Play-Fi: MPEG4 AAC, MPEG4 M4A, MP3,
WAV, FLAC, AIFF
19 EN
8 Product
specifications
Note
• Specications and design are subject to
change without notice.
Amplier
• Total output power:
808W MAX / 410W RMS (1%THD)
• Frequency response (main unit): 150Hz-
20kHz
• Frequency response (Subwoofer): 35Hz-
150Hz
• Signal-to-noise ratio:
>65 db(CCIR) /(A-weighted)
Audio
• S/PDIF Digital audio input:
• Optical: TOSLINK
Bluetooth
• Bluetooth prole: A2DP
• Bluetooth version: 4.2
• Frequency band/Output power: 2402
MHz ~ 2480 MHz / d 2dBm
Wi-Fi
• Wi-Fi IEEE 802.11 a/b/g/n
• Frequency band: 2.412 - 2.472 GHz,
5.18 - 5.32GHz, 5.50 - 5.70GHz, 5.745 –
5.825GHz
• Radio frequency power transmitted: WiFi
2.4G: 17.6dBm; WiFi 5G: 16.38dBm; WiFi
5.8G: 8.07dBm
Main unit
• Power supply: Model (Philips branded AC
power adapter): NSA120EC-19063200
• Input: 100-240 V~, 50/60 Hz, 2.0 A
• Output: 19 V 6.32 A
• Power consumption: 25 W
• Standby power consumption: <0.5 W
• Audio channel: 5.1.2
• Built-in speakers:
• Central: 2 racetracks full range drivers
• Front speaker: 4 full range drivers +
2 tweeters
• Up-ring: 2 full range drivers
• Side-ring: 2 tweeters
• Dimensions (W x H x D):
1049 x 120 x 55.6 mm
• Weight: 4.07kg
• Operating temperature: 0°C - 45°C
Subwoofer
• Power supply: 220-240 V~, 50/60 Hz
• Power consumption: 20 W
• Standby power consumption: <0.5 W
• Speaker driver: 1 x 8” subwoofer
• Impedance: 3 ohm
• Dimensions (W x H x D):
400 x 230 x 407 mm
• Weight: 9.6kg
• Operating temperature: 0°C - 45°C
Audio codec format
• HDMI: Dolby Digital, Dolby Digital plus, Dolby
Digital EX, Dolby TrueHD, Dolby Atmos, DTS,
DTS 96/24, DTS-ES, DTS Digital Surround
(5.1-ch), DTS-HD High Resolution Audio,
DTS-HD Master Audio, DTS ES, DTS: X, IMAX
Enhanced
• HDMI eARC: Dolby Digital, Dolby Digital
plus, Dolby Digital EX, Dolby TrueHD, Dolby
Atmos, DTS, DTS 96/24, DTS-ES, DTS Digital
Surround (5.1-ch), DTS-HD High Resolution
Audio, DTS-HD Master Audio, DTS ES, DTS: X
• Optical: Dolby Digital, Dolby Digital plus, LPCM
2ch
• Bluetooth: SBC
• Play-Fi: MPEG4 AAC, MPEG4 M4A, MP3,
WAV, FLAC, AIFF
To Next Page