Philips Fidelio B95 - Connection and Setup Guide; Connecting to Your TV via HDMI

To Next Page

To Previous Page

7 EN

3 Connect and

set up

This section helps you connect this product

to a TV and other devices, and then set it up.

For information about the basic connections

of this product and accessories, see the

quick start guide.

Caution

• For identication and supply ratings, see the

type plate at the back or bottom of the product.

• Before you make or change any connections,

make sure that all devices are disconnected

from the power outlet.

Placement

Place the subwoofer at least 1 meter (3 feet)

away from the main unit, and 10 centimeters

(4 inches) away from the wall.

For best results, place your subwoofer as

shown below.

BSU

WOOFER

1m/3ft

10cm/4”

Connect to TV

Connect this product to your TV. You can

enjoy audio from TV programs through the

soundbar speaker. Use the best quality

connection available on your soundbar

speaker and TV.

Connect to TV through HDMI

(ARC/eARC)

This product supports HDMI with eARC

(Enhance Audio Return Channel). eARC is a

new function standardized by HDMI 2.1 and

supports the latest audio formats in addition

to audio formats that are supported with

existing ARC (Audio Return Channel). If your

TV is HDMI eARC compliant, you can enjoy

the TV audio that ARC cannot transfer, such

as Dolby Atmos-Dolby TrueHD and DTS:X,

or multi-channel LPCM contents, by using a

single HDMI cable.

What you need

• A High-Speed HDMI cable.

• Your TV supports both HDMI ARC and

HDMI-CEC (see the TV user manual for

details).

• For some TV models, enable the external

speaker output from the TV setting menu

(see the TV user manual for details).

HMDI IN

(eARC/ARC)

1 Using a High Speed HDMI cable,

connect the HDMI OUT connector on

this product to the HDMI ARC connector

on your TV.

• The HDMI ARC connector on the

TV might be labeled dierently. For

details, see the TV user manual.