Philips Fidelio FB1 - User Manual

Other manuals for Philips Fidelio FB1

Manual35 pages

Questions and Answers

A
amber79Aug 18, 2025
What to do if a device cannot connect with my Philips Speaker System soundbar?
- M
  Marie HicksAug 18, 2025
  If a device cannot connect to the Philips Speaker System soundbar, it might be due to several reasons: * The device may not support the compatible profiles required for the soundbar. * The Bluetooth function of the device may not be enabled. Refer to the device's user manual on how to enable it. * The device may not be correctly connected. Ensure correct connection. * The soundbar might already be connected to another Bluetooth device. Disconnect the currently connected device and try again.
C
Christian DeanAug 20, 2025
Why is my Philips Fidelio FB1 Speaker System remote control not working?
- T
  Teresa DunnAug 20, 2025
  If your Philips Speaker System remote control isn't working, try these steps: * Select the correct source before pressing any playback control button. * Reduce the distance between the remote and the unit. * Ensure the batteries are inserted with correct polarities (+/-). * Replace the batteries. * Aim the remote directly at the sensor on the front of the unit.
N
Nathan HuffmanAug 23, 2025
What to do if the buttons on my Philips Fidelio FB1 do not work?
- M
  michaelmeyerAug 23, 2025
  If the buttons on your Philips Speaker System main unit do not work, disconnect the unit from the power supply for a few minutes, then connect it again.
R
richard47Aug 26, 2025
What to do if there is no sound from my Philips Speaker System soundbar speaker?
- E
  ehoodAug 26, 2025
  To troubleshoot a Philips Speaker System soundbar with no sound, try the following: * Ensure the audio cable is connected from the soundbar to your TV or other devices. * Select the correct audio input on the remote control. * Make sure the soundbar is not muted. * Reset the product to its factory settings. * Power down the product completely and start over. * If in Wi-Fi mode, check your home network.
S
Samantha NortonAug 28, 2025
How to troubleshoot a Philips Speaker System that has no power?
- S
  Steven BarnesAug 28, 2025
  If your Philips Speaker System has no power, please check the following: 1. Ensure the AC cord is properly connected. 2. Ensure that there is power at the AC outlet. 3. Press the standby button on the remote control or soundbar to turn the soundbar on.
C
Craig GrantAug 30, 2025
How to fix a Philips Fidelio FB1 Speaker System Wi-Fi connection that cannot be established?
- C
  Carol PattonAug 31, 2025
  If the Wi-Fi connection for your Philips Speaker System cannot be established, try the following: * Check the availability of the WLAN network on the router. * Place the Wi-Fi router closer to the unit. * Make sure the password is correct. * Check the WLAN function or reboot the modem and Wi-Fi router.
L
Lisa CunninghamSep 2, 2025
Why does my Philips Fidelio FB1 Speaker System have distorted sound or echo?
- Z
  zmcgrathSep 2, 2025
  If you are experiencing distorted sound or echo with your Philips Speaker System, and you are playing audio from your TV through the product, ensure that the TV is muted.
W
Walter BanksSep 4, 2025
How to synchronize audio and video on my Philips Fidelio FB1?
- E
  ehuntSep 4, 2025
  If the audio and video are not synchronized on your Philips Speaker System, press enter to access the setting menu, then select ‘AV SYNC’ to synchronize the audio with the video.
B
bakerethanSep 7, 2025
Why is the audio quality poor from a Bluetooth device connected to my Philips Speaker System?
- G
  gburnsSep 7, 2025
  If the quality of audio play from a connected Bluetooth device to your Philips Speaker System is poor, the Bluetooth reception might be weak. Try moving the device closer to the soundbar, or remove any obstacles between the device and the soundbar.
L
Laura BushSep 9, 2025
Why does my Philips Fidelio FB1 turn off after 15 minutes?
- B
  bernardpamelaSep 9, 2025
  To resolve this Philips speaker system issue, increase the volume level of your external device. When the unit’s external input signal level is too low, the unit will turn off after 15 minutes as part of the ERPII standard for saving power.

Summary

Important Safety Instructions

General Safety Precautions

Essential safety warnings and precautions for using the product.

Your Soundbar

Whats in the Box

Main Unit and Connectors

Remote Control Guide

Detailed explanation of the remote control's buttons and functions.

Remote Control Battery Preparation

Battery Insertion and Precautions

Instructions for inserting batteries and important safety guidelines.

Soundbar Placement and Mounting

Optimal Placement

Wall Mounting Instructions

Detailed instructions for securely mounting the soundbar on a wall.

Connecting Your Soundbar

HDMI and Dolby Atmos Setup

Connecting for Dolby Atmos and optimal HDMI audio experience.

Power, Subwoofer, and Wi-Fi Setup

Using Your Soundbar

Basic Operations: Power, Modes, Volume

Sound Customization and Enhancements

Product Specifications

Supported Audio Formats

Troubleshooting Guide

Main Unit and Power Issues

Troubleshooting common issues with the main unit and power.

Sound and Synchronization Problems

Connectivity Troubleshooting

Philips Fidelio FB1 Specifications

General

Equalizer	Yes
Audio decoders	DTS, DTS 96/24, DTS Digital Surround, DTS-ES, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD
Equalizer modes	Movie, Music
RMS rated power	310 W
Audio output channels	7.1.2 channels
Peak Music Power Output (PMPO)	620 W
Number of tweeter drivers	3
Number of full-range drivers	6
Total Harmonic Distortion (THD)	1 %
Subwoofer sensitivity	96 dB
Subwoofer connectivity	Wireless
Subwoofer frequency range	40 - 20000 Hz
Woofer diameter (subwoofer)	3.5 \
Night mode	No
Display type	LED
Product color	Black
Audio formats supported	AAC, AIFF, FLAC, LPCM, M4A, MP3, WAV
High Dynamic Range (HDR) technology	Dolby Vision IQ, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
Pallet net width	220 mm
Pallet net height	380 mm
Pallet net length	1370 mm
Pallet GTIN (EAN/UPC)	14895229127385
HDMI in	1
HDCP version	1.4/2.3
Wi-Fi frequency	5 GHz
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Bluetooth profiles	A2DP, AVRCP, SBC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Package type	Carton
Package depth	205 mm
Package width	1350 mm
Package height	175 mm
Package weight	8500 g
Pallet net weight	18500 g