Philips Fidelio FB1 - Play from Bluetooth Devices

23EN
SUB PAIR
FB1 soundbar can pair with FW1 (not
supplied) Play-Fi wireless subwoofer.
» Press
> select “SUB PAIR” >
Then press
(Enter) to conrm
the subwoofer pairing mode.
» Follow step in “Pairing
with Subwoofer (FW1) via
proprietary RF link”.
Update rmware via USB
Check if there is the latest rmware
version on www.philips.com/support.
Search for your model and click on
“Software and drivers”.
Copy the software update les into USB
ash drive, insert USB ash drive on the
unit.
» Press
> select “UPGRADE” >
“PLAY TO START”
» Then press
(Enter) to conrm.
» Upgrade nished and restart.
Play from Bluetooth
devices
Through Bluetooth, connect the
soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
can listen to the audio les stored on the
device through your soundbar speakers.
1 Press the button repeatedly on the
unit or on the remote control to switch
the soundbar to Bluetooth mode.
» BT is displayed on the display
panel.
2 On the Bluetooth device, switch
on Bluetooth, search for and
select “Philips Fidelio FB1” to start
connection (see the user manual
of the Bluetooth device on how to
enable Bluetooth).
3 Wait until you hear the voice prompt
from the soundbar.
» If the successfully connected,
CONNECTED is displayed on the
display panel.
4 Select and play audio les or music
on your Bluetooth device.
• During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
• If your Bluetooth device supports
AVRCP prole, on the remote
control you can press
/ button
to skip to a track, or press
button to pause/resume play.
To disconnect and pair a new
Bluetooth device
1 In Bluetooth mode, press > select
“BT PAIR” > Then press
(Enter) to
disconnect from current connected
BT devices and enter the Bluetooth
pairing mode.
• Alternatively directly press and
hold
button for 3 seconds on the
soundbar to disconnect from current
connected BT devices and enter the
Bluetooth pairing mode.
» The display will ashing “PAIR“.
2 Follow step 2-3 in “Play from
Bluetooth devices“ above to pair
your Bluetooth device.
Note
•
In an open space without obstructions.
The maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
• Compatibility with all Bluetooth devices is not
guaranteed.
• The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.