8 EN
5
(Standby-On) button
Power
State
Action Function
On Follow source state
Semi
Standby
Press
the
button
once
• Wi-Fi is connected.
• It supports Play-
and Airplay2
Chromecast,
Spotify connect,
work with Alexa.
Eco
Standby
Press
and
hold
>2
seconds
• Wi-Fi is o.
• The product enters
the lower power
consumption mode.
• Restarting the
system will take a
relatively longer time.
6
Remote control sensor /
Display panel
7
Audio light ring (White)
When the height channel (such
as Dolby Atmos) audio output is
detected, the audio light ring will
turn on for 10 seconds and turn o.
If you want the audio light ring to
be ON or OFF, it can be dened by
“LIGHT” in the setup menu.
8
Power LED
Turns white when in Eco standby
(network disconnected).
9
Wi-Fi LED indicator (Yellow)
LED State Status
Blink Wi-Fi Access Point (AP)
mode
Double blink Wi-Fi Protected Setup
(WPS) mode
Constant on Connected / Pairing
successful
Connectors
This section includes an overview of the
connectors available on your soundbar.
8
9
IR ou t
Mic in
1 2 3 4 5 6 7
1
(Wi-Fi Setup) button
• Trigger Wi-Fi setup for Play-.
• Press and hold the button for 3
seconds to active the Wps mode.
• Press and hold the button for 8
seconds to active the AP mode.
2
Mic in
Microphone input for auto room
calibration.
3
IR out
IR pass-through cable connector.
4
USB
• Connect to a USB storage device for
audio media play.
• Upgrade software of this product.
5
Optical
Connect to an optical audio output
on the TV or a digital device.
6
HDMI out (eARC/ARC) Socket
Connect to the HDMI (eARC/ARC)
input on the TV.
7
HDMI in Socket
Connect to the HDMI source devices,
such as a DVD player, Blu-ray Disc™
player, or gaming console.
8
AC Socket
Connect to the power supply.
9
Wall bracket slot
To Next Page
Loading...
