Philips FW 316C - Sound Customization and Enhancements

Ore er rere,
Sound Control
Volume Adjustment
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the §}\ socket at the
front of the system. The speakers will be muted.
Digital Sound Control (DSC)
The DSC feature enables you to enjoy special sound
effects that have preset equalizer settings, providing the
best music reproduction.
e Press DIGITAL SOUND CONTROL (DSC) to select
OPTIMAL, JAZZ, ROCK or TECHNO.
~~ The Digital Sound Control display panel will light up
respectively.
— “OPTIMAL, JAZZ, ROCK or TECHNGD" will
be displayed.
Automatic DSC-DBB selection
The best setting for the DBB is automatically generated
for the respective DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
DBB Onloft
DSC Selection
Optimal
Se —-- ~
fmm be te ee The Ae wee eS.
rt ent ee
Dynamic Bass Boost (DBB)
The DBB mode enhances the bass response.
e Press DBB to switch on bass response.
—~ The DBB button lights up.
— “TBE ON" will be displayed.
To switch off DBB
¢ Press DBB again.
— The DBB button light is switched off.
— “BBB OFF” will be displayed.
Note:
— Some CDs or tapes might be recorded in high
modulation. It may cause a distortion at high volume.
If this occurs, switch off Incredible Surround (if
available), DBB level or reduce the volume.
= —e a
OPERATING THE SYSTEM |
Incredible Surround (available in model FW339C only)
Normal stereo sound ts determined by the distance
between the front speakers. When Incredible Surround is
switched on, it magnifies the virtual distance between
the front speakers for an incredibly wide, enveloping,
stereo effect.
¢ Press INCREDIBLE SURROUND to switch on.
— The INCREDIBLE SURROUND button lights up.
— "TS" will be displayed.
To switch off Incredible Surround
¢ Press INCREDIBLE SURROUND again.
— The INCREDIBLE SURROUND button light is
switched off.
—- "TS OFF” willbe displayed.
Mute (available in model FW316C remote control only)
This feature allows you to temporarily switch off the
sound of the system without switching off the system
when you require a moment of silence.
e Press MUTE on the remote
control to switch off the sound.
— “MUTE” will be displayed.
e Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.