Philips FW 316C - CD Player Functions; Loading Discs and Direct Playback

12
CHANGER
3 CO ROTARY CHANGER SYSTEM > CD SYNCHAD RECORDING
ELT AGUND CO .TREL
Warning!
1) This system is designed for conventional CDs. Do not use any accessories like disc stabilizer rings or
CD treatment sheets, etc., which may damage the CD mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with CD(s), do not turn over or shake the system. This may jam the
changer.
You can load up to three discs in the CD changer for continuous playback without interruption.
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN*CLOSE.
— The CD compartment slides out.
3 Load a CD with the printed side up in the right tray.
e You can load another disc in the left tray.
¢ To load the third dise, press the DISC CHANGE
button.
— The CD changer carousel will rotate until the empty
tray is at the right hand side and is ready for
loading.
— Playback will always start with the disc in the outer
right disc tray.
4 Press OPEN*CLOSE to close the CD compartment.
— The total number of tracks and playing time of the
last selected disc appear on the display.
3 CD Direct Play
You can play a CD directly by pressing the 3 CD DIRECT
PLAY (1 - 3) buttons. The CD player will stop at the end
of playback of the selected disc.
— When the button is lighted, it indicates that there is a
disc loaded in the disc tray.