Philips FW 316C - Recording from Other Sources; Clock and Timer Functions; Viewing and Setting the System Clock

RECORDING
CD Synchro Start Recording
During CD synchro start recording,
¢ It is not advisable to fast forward/rewind your tape in
tape deck 2.
¢ |t is not possible to fisten to another source.
1 Load a blank tape into tape deck 1 and a disc into the
disc tray.
2 Press CD.
¢ You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
3 Press RECORD on tape deck 1 to start recording.
4 Press STOP*OPEN on tape deck 1 to stop recording
and STOP @ to stop CD playback.
Recording from other sources (only on tape
deck 1}
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER, TAPE or AUX.
¢ Start playback of the selected source.
3 Press RECORD on tape deck 1 to start recording.
- The REC flag is flashing.
4 Press PAUSE to interrupt recording.
5 Press STOP*OPEN on tape deck 1 to stop recording.
Note:
— During recording, it is not possible to listen to another
sound source.
(fe) CG
S < :
STAC COSY-ON
|
{
MINI HIF! SYSTEM VOLUME | Did =
f
f=) ©]
—
rr
TAPE 16 TAPT 2
SUFAGUAD CONTROL
Ss... eibed pppoteniciert og
ies ees o
View Clock
You can view the clock (if it is set) at standby or any
source mode. It will be displayed for about 7 seconds.
¢ Press CLOCK*TIMER briefly.
> * f@225" (the current time) will be displayed.
—- “+ -:--" will be displayed if the clock is not set.
Clock Setting
The clock is set in 24-hour made, e.g. “2 2:722" or
“e 3/59". Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCKeTIMER to select clock mode.
— “2G:2G" or the current time starts flashing.
— “44 ,>> 14, pi, Mf light up (for model
FW339C only).
2 Set the hour with <4 or b>.
3 Set the minute with I or PI.
4 Press CLOCK*TIMER again to store the setting.
— The clock starts running.
e To exit without storing the setting, press STOP Ml.
Notes:
— During clock setting, if no button is pressed within 90
seconds, the system will exit clock setting mode
automatically.
— When a power interruption occurs, the clock setting is
erased.
19