Philips FW 316C - Tuner and Radio Operations; Automatic and Manual Station Tuning

g
14
CD
Playing the program
1 Press PLAY » to start program playback.
— "PLAY PROGRAM” appears on the display.
— The track number and elapsed playing time of the
current track will appear on the display.
e If you press REPEAT during program playback, the
current track will be played repeatedly.
—> The REPEAT and PROGRAM flags will be displayed.
2 Press STOP Mi to stop program playback.
Note:
— /f you press any of the 3 CD DIRECT PLAY buttons, the
system will play the selected disc or track and the
stored program will be ignored temporarily. The
PROGRAM flag will also temporarily disappear from
the display and then reappear when the playback for
the selected dise ends.
Reviewing the program
Reviewing of the program is only possible in the stop
mode.
e Press PREV I or NEXT >I repeatedly to review the
programmed tracks.
e Press STOP M@ to exit review mode.
Erasing the program (in the stop mode)
e Press CLEAR on the system.
~ "PROGRAM CLEARED” will be displayed.
Note:
— The program will be erased when the system is
disconnected from the power supply. If the CD
carousel is opened, the tracks belonging to the outer
two trays will be erased and the display will show
‘CLEARED ”.
Shuffle (only on remote control)
It will play all the available discs and their tracks in
random order. Shuffle may also be used when tracks are
programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
— “GHUFFLE” will be displayed.
— The SHUFFLE flag, the disc and the track selected
at random appear on the display.
The dises and the tracks will now be played in random
order until you press STOP Mi.
If you press REPEAT during shuffling, the current track
will be played repeatedly.
— The REPEAT and SHUFFLE fiags will be displayed.
2 Press SHUFFLE again to resume normal playback.
— The SHUFFLE flag disappears from the display.
Repeat (only on remote control)
It will play the current track repeatedly.
1 Press REPEAT during CD playback.
— “REPEAT TRACK” will be displayed.
— The REPEAT flag appears on the display.
e The track will now be played repeatedly until you
press STOP Ml.
2 Press REPEAT again to resume normal playback.
— The REPEAT flag disappears from the display.
TUNER
Easy Set
EASY SET allows you to store all available radio stations
in a particular band (FM, MW or LW) automatically.
e Press and hold STANDBY®ON (on the system only)
for 2 seconds; when the system is in standby or
demonstration mode.
— "EASY SET* will be displayed and followed by
"TUNER",
— EASY SET will start with the last active band.
— All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
Notes :
~ When EASY SET is used, all previously stored radio
stations will be erased.
~ The last preset radio station will appear on the display
when EASY SET is completed.
Tuning to radio stations
1 Press TUNER to select TUNER mode.
— "TUNER? will be displayed.
A few seconds later, the current frequency or the
radio station name if available will be displayed.
2 Press TUNER (BAND) again to select the desired
waveband : FM, MW or LW.
3 Press TUNING <4 or >> for more than one second,
then release.
— The display will show ‘SERRCH' until a radio
station with sufficient signal strength is found.
e Repeat this procedure until the desired station is
reached.