20
English
3139 115 20522
Tape Playback
1 Press TAPE (TAPE 1•2) to select TAPE mode.
➜ "TAPE 1" or "TAPE 2" will be displayed and
followed by "T1 222 " or "T2 222".
2 Load the tape into the selected tape deck.
3 Press É to star t playback.
➜ "T1" or "T2" with "2" scrolling right will be
displayed.
¶ Press A.REPLAY to select the different type of
playback mode (see Auto Replay)
4 Press Ç to end playback.
➜ "T1" or "T2" with "222" will be displayed.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward the tape by
pressing à or á respectively.
➜ If rewinding, "T1 1 or T2 1" with “1”
scrolling left will be displayed.
➜ If fast forwarding, "T1 2 or T2 2" with “2”
scrolling right will be displayed.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press Ç to stop rewinding or fast forwarding.
During playback
¶ Press and hold à or á until the desired
passage is located.
➜ “T1 or T2” with “11 or 22”" scrolling left or
right will be displayed depending on which
button is pressed.
➜ During searching, the sound is reduced to a
low volume.
➜ When you release à or á, the tape
continues playing.
Notes:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (e.g. CD,
TUNER, or AUX).
– Before playing a tape, check and tighten slack
tape with a pencil. Slack tape may get jammed or
may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not recommended for
use in this system.
– Store the tapes at room temperature and do not
put them too close to a magnetic field (for
example, a transformer, TV, or speaker).
Ta p e
pg 01-28/C290/21-Eng 29/05/2001, 10:52 AM20
To Next Page
Loading...
