2-7
PCS 103 338
19
Selecting External
Equipment
If you have connected the audio out
terminals of the external equipment
(TV, VCR, Laser Disc player, DVD player
or CD Recorder) to the AUX IN
terminals, you can hear the enhanced
sound from the system.
• Press AUX to select the external
equipment.
™ "AUX" will be displayed.
Note:
– All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
TAPE AUX
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
–C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV or speaker).
.
20
SOUND NAVIGATION - JOG
STANDBY
-
ON
PROGRAM CLOCK•TIMER DIM
FULL AUTO STOP
MASTER
VOLUME
TAPE 2
TAPE 1
PLAY
STOP
.
O
PEN
PAU
SE
▲
RECORD
P
LAY
STOP
.
OPE
NPAU
S
E
▲
▲
▲
▲
FW-
C10
MINI HIFI SYSTEM
CD1 • 2 • 3 FM •AM
TAPE 1 • 2
TAPECD TUNER
AUX
PRESET
▲
▲
TUNING
▲
▲
▲
▲
STOP• CLEAR
SEARCH
PLAY• PAUSE PREV NEXT
D
B
B
VIDEO
▲
▲
▲
▲
▲
▲
OPTIMAL
JAZZ
ROCK
TECHNO
JOG
CONTROL
Notes:
– For recording, use only tape of IEC type
I (normal tape).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
–To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
• For One Touch Recording, as soon as
you press RECORD, the current
source (CD, TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recording.
™ The
REC
starts flashing.
3 Press PA USE to interrupt
recording.
4 Press STOP•OPEN on tape deck 1
to stop recording.
RECORDING
CD Synchro Start
Recording
During CD synchro start recording,
• Do not fast forward/rewind your
tape in tape deck 2.
• Do not listen to another source.
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
•You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If you do
not, the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD on tape deck 1 to
start recording.
™ The
REC
starts flashing.
4 Press STOP•OPEN on tape deck 1
to stop recording, then press Ç to
stop CD playback.
Dubbing tapes
(from tape deck 2
to tape deck 1)
1 Load the prerecorded tape into tape
deck 2 and a blank tape into tape
deck 1.
• Make sure both tapes have their full
spool to the left.
2 Press PA USE on tape deck 1.
3 Press RECORD on tape deck 1.
4 Press PLAYÉ on tape deck 2.
™ The
REC
starts flashing.
To Next Page
Loading...
