Radio Reception
20
English
Notes:
– If you attempt to store more than 40 preset
radio stations,"PROGRAM FULL" will be displayed.
– During programming,if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.
Tuning to Preset Radio Stations
● Once you’ve preset the radio stations,press í
or ë to select the desired preset number.
➜ The preset number, radio frequency, and
waveband will appear on the display.
Erasing a Preset Radio Station
1
Press í or ë to select the preset radio station
to be erased.
2 Press and hold Ç on the system until “PRESET
DELETED”appears on the display.
➜ The radio frequency remain on the display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
● Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.
RDS
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send additional
information along with the regular FM radio
signal.This additional information can contain:
Station name:The radio station name is
displayed.
Programme type:The following programme
types exist and can be received by your tuner:
News,Affairs, Info,Sport, Educate, Drama,
Culture, Science,Varied, Pop M,Rock M, M.O.R.
(middle of the road music),Light M,Classics,
Other M,No type.
Radio text (RT): text messages appear on the
display.
Receiving RDS Radio Station
● Tuned to a radio station from FM band.
➜ If the radio station transmitting RDS signal,the
RDS logo ( ) and the radio station name
will appear on the display.
To check the RDS information
● Press RDS repeatedly to scroll through the
following information (if available) : STATION
NAME ™ PROGRAMME TYPE ™ RADIO TEXT
™ TUNED FREQUENCY ™ STATION NAME ....
Notes:
– If the tuned radio station does not transmit RDS
signal or is a non RDS station,"NO RDS" will be
displayed.
– If the RDS text message is not available at the
RDS station,"NO RDS TEXT" will be displayed.
To Next Page
Loading...
