8
English
Rear Connections
The type plate is located at the rear of the
system.
A Power
Before connecting the AC power cord to the
wall outlet,ensure that all other connections have
been made.
WARNING!
– For optimal performance,use only the
original power cable.
– Never make or change connections with
the power switched on.
To avoid overheating of the system,a
safety circuit has been built in. Therefore,
your system may switch to Standby mode
automatically under extreme conditions.
If this happens,let the system cool down
before reusing it (not available for all versions).
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
AM Antenna
● Position the antenna as far as possible from a TV,
VCR or other radiation source.
To Next Page
Loading...
