Troubleshooting
30
English
The remote control does not function – Select the source (CD or TUNER,for example)
properly. before pressing the function button (É,í,ë).
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/- signs) aligned as indicated.
– Replace the batteries.
– Point the remote control in the direction of the
system’s IR sensor.
The timer is not working. – Set the clock correctly.
– Press TIMER ON/OFF to switch on the timer.
– If recording is in progress,stop recording.
Not all lighted buttons are showing – Press DISPLAY to select NORMAL or MODE 1
light. display mode.
The Clock/Timer setting is erased. – Power has been interrupted or the power cord has
been disconnected.Reset the clock/timer.
The system displays features – Press and hold DEMO STOP Çon the system
automatically and buttons start flashing. to switch off the demonstration.
To Previous Page
