14
English
IMPORTANT!
– If the picture is distorted, check the
Video Output setting. Make sure it is set
to ‘S-Video’. (See Setting video
preference).
Using S-Video In jack
● Use the S-Video cable (not supplied) to connect
the system’s S-VIDEO jack to the S-Video
input jack (or labeled as Y/C or S-VHS) on the
TV set.
Connections
Connecting digital
audio equipment
Digital audio recorder
Recording (digital)
Connect the system’s COAXIAL (digital out)
jack to the DIGITAL IN jack on a digital
recording device (DTS-Digital Theater System
compatible, with a Dolby Digital decoder, for
example).
Before operation, set AUDIO OUT according to
the audio connection.
pg001-pg018_FWD18_98-Eng 2008.5.20, 17:1314
To Next Page
Loading...
