English
17
Preparations
Setting language preference
You can select your preferred language settings
so that this DVD system will automatically switch
to the language for you whenever you load a
disc. If the language selected is not available on
the disc, the language set by default will be used
instead.
1 In disc mode, press SYSTEM MENU.
2 Select LANGUAGE SETUP icon and
press 4.
3 Press 5 / 4 keys on the remote control to
select your preferred option.
➜ Move to one of the following and press B.
– OSD LANGUAGE
– MENU LANGUAGE
4 Press 5 / 4 to select a language and press OK.
5 Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
1 In disc mode, press SYSTEM MENU.
2 Select SYSTEM SETUP icon and press
4.
3 Press 5 / 4 keys on the remote control to
toggle through the functions and select your
preferred option.
➜ Move to “TV System” and press B.
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
AUTO
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
pg001-pg018_FWD18_98-Eng 2008.5.20, 17:1317
To Next Page
Loading...
