Philips FWD18/98 - Changing the Password; Restricting Playback by Setting Rating Level

English
27
System Menu Operations
Changing the password
You can change the four-digit code used as
Password.
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
3 Press 5 / 4 on the remote control to navigate
in the menu.
➜ Move to “PASSWORD” and press B.
4 Use the numeric keys (0-9) to enter your
four-digit code.
➜ The password supplied by default is 0000.
➜ If you forget the four-digit code, press 0 four
times, the system will change back to the default
password.
5 Enter your new code. Then press OK to
confirm.
6 Press SYSTEM MENU again to remove the
menu.
4:3 PS
(Pan Scan)
4:3 LB
(Letter Box)
16:9
(Wide screen)
Restricting playback by setting rating
level
Some DVDs may have a rating level assigned to
the complete disc or to certain scenes on the
disc. This feature lets you set a playback limitation
level. The rating levels are from 1 to 8 and are
country specific. You can prohibit the playing of
certain discs that are not suitable for your
children and you can have certain discs played
with alternative scenes.
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
3 Use 5 / 4 on the remote control to navigate
in the menu.
➜ Move to “PASSWORD” and enter the
password to open the lock. (See to “changing the
password”)
➜ Move to “RATING” and press 2.
pg019-pg040_FWD18_98-Eng 2008.5.20, 17:1427