13
English
Step 4: Connecting FM/MW
antennas
● Connect the supplied MW loop antenna to
the MW jack. Place the MW loop antenna
on a shelf or attach it to a stand or wall.
● Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fix its
end to the wall.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
Notes:
– Adjust the position of the antennas for
optimal reception.
–Position the antennas as far as possible
from your TV set, VCR or other radiation
sources to prevent unwanted interference.
Step 5: Connecting the power
cord
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
On the DVD Mini Hi-Fi System
“AUTO INSTALL PRESS PLAY” may appear
on the display panel. Press 2; on the front panel
to search and store all available radio stations or
press 9 to exit.
Connections
12 mm
~ AC MAINS
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
If your system is equipped with
a Voltage Selector, set the
VOLTAGE SELECTOR to
the local power line voltage.
VOLTAGE
SELECTOR
110V~127V
220V~240V
fwd872-98 UM v1.0 2007.12.10, 17:2613
To Next Page
Loading...
