36
English
Listening to an external source
You can listen to the sound of the conntected
external device through your FWD872.
1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX IN
terminals of your system.
2 Press TAPE/AUX once or twice on the system
(or on the remote control) to select AUX
3 To avoid noise distortion, turn down the volume
on your external device.
4 Press the PLAY key on the connected device to
start playback.
5 To adjust the sound and volume , use the sound
controls on your external device and the
FWD872.
Notes:
–You are advised not to listen to and record from
the same source simultaneously.
– All navigation sound control features are
available.
AUX Operation
fwd872-98 UM v1.0 2007.12.10, 17:2736
To Next Page
Loading...
