Philips FX20 - Page 25

Mechanical and Dismantling Instructions
Dismantling Instruction
The following guidelines show how to dismantle the player.
6-2
Detailed information please refer to the model set.
Step 3:Dismantle the loader bracket.Remove 1 screw on the bracket then remove the bracket directly.
(Figure 3)
(Figure 3)
Step 4:Dismantle the front panel.Disconnect the connectors on the main and power board. Release 2
and right sides.(Figure 4)
(Figure 4)
Step 5:Dismantle the USB board.Remove 2 screws on the board.(Figure 5)
buckles under the bottom plate and 2 screws on the left
Step 6:Dismantle the IN board.Remove 2 screws on the board.(Figure 5)
Step 7:Dismantle the support board.Remove 2 screws on the board.(Figure 5)
Step 8:Dismantle the key board.Remove 2 screws on the board and disconnect the connector.(Figure 5)
(Figure 5)