Philips HD TV - Professional Mode Setup; Introduction to Professional Mode; Customizing Setup Settings

EN 26
4 Professional
mode
What you can do
In professional mode, you can configure the
TV for hotel use. Features include:
 Changing professional setup items, such
as power and speaker settings.
 USB cloning
 Downloading software via RF, including
SSB firmware, Theme TV and hotel
information.
Enter and enable
professional mode
Enter professional mode
1. Press on the remote control.
2. Press 3, 1, 9, 7, 5, 3, . The professional
mode menu appears.
Enable professional mode
1. In the professional mode menu, select
[Professional Setup] > [Professional mode].
2. Use the Navigation buttons to select a
setting to change, then press OK:
 [On]: Switch on professional mode.
Hospitality features are enabled.
 [Off]: Switch off professional mode.
The TV operates as a normal consumer
TV.
Store changes to professional
mode
After making changes to the TV in
professional mode, you must store the
changes to enable them.
1. In the professional mode menu, select
[Store], then press OK.
2. Follow the onscreen instructions to store
the changes that you made.
Change professional setup
settings
There are several professional setup settings
you can change to configure the TV for hotel
use.
Change menu language
1. In professional mode, select [Professional
Setup] > [Setup menu language].
2. Change the setup menu language to
English (default), French, German or Italian.
Change native UI source
1. In professional mode, select [Professional
Setup] > [Native UI Source].
2. Change the source of the user interface to
browser or native (HTML or Flash).
Change Room ID
1. In professional mode, select [Professional
Setup] > [Room ID].
2. Set a room ID for the TV. Restricted to
numeric characters only, with a maximum of
four characters.
Change Smart TV settings
1. In professional mode, select [Professional
Setup] > [Smart TV Settings].
2. Use the Navigation buttons to select a
setting to change, then press OK:
 [NetTV]: Under [Configuration], select
[Off] to disable NetTV, select [On] to
display the Net TV portal provided by
the Philips Net TV server. If you select
[Configuration], [Hotelier] and
[Profile] options become visible --
[Hotelier] and [Profile] are text entry
fields that allow you to input data to
access the hotel's portal home page.