10 EN
6 Open the protective cover, insert the
power cord, and connect the power.
» The indicators fl ash in a circle,
indicating that the power is
connected.
7 Press 选择 (Select) to select 干/湿
豆豆浆 (Soymilk).
» The 干/湿豆豆浆 (Soymilk)
indicator lights up.
8 Press 启动 (Start).
» The 工作中 (Working) indicator
fl ashes and 1 beep occurs,
indicating that processing starts.
After about 24 minutes, 6 beeps
occur and the 保温 (Keep warm)
indicator lights up, indicating
that soymilk is ready. If no other
operations are performed,
the appliance starts the keep
warm function. The keep warm
function lasts for 1 hour, and then
automatically stops (see the "Keep
warm" section on Page 18).
2 Install the perforated fl ow cup and
rotate it to the correct position, as
shown in the illustration.
» Make sure that it cannot be pulled
off.
3 Put the soybeans evenly at the
bottom of the chamber to prevent
them from touching the perforated
fl ow cup.
4 Pour water into the chamber.
Make sure that the water level is
between 上水位 (the maximum
level indication) and 下水位 (the
minimum level indication).
ഌට໎
༳ට໎
ഌට໎
༳ට໎
5 Put the head unit into the chamber.
Make sure that the upper plug is
correctly inserted into the connector.
To Next Page
Loading...
