Philips HD3137 User Manual

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

HD3137

Enregistrez votre produit et obtenez de l’assistance sur le site

www.philips.com/welcome

Des

questions ?

Contactez

Philips

User manual 1 Mode d’emploi 17

Toujours là pour vous aider

Table of Contents

Questions and Answers:

S
Shawn BradfordAug 17, 2025
Why is my rice not cooking in Philips Kitchen Appliances?
- K
  Kristina VasquezAug 17, 2025
  If your rice is not cooking properly in your Philips Kitchen Appliances multicooker, it could be due to several reasons. Ensure you are adding enough water, using the scale inside the inner pot as a guide. Also, verify that you have pressed the start button. Before starting the multicooker, check for any foreign residue on the heating element and the outside of the inner pot. If the heating element is damaged or the inner pot is deformed, take the multicooker to your Philips dealer or an authorized service center.
L
Linda MorganAug 19, 2025
What to do if the light on my Philips Kitchen Appliances button doesn't turn on?
- C
  cainaustinAug 20, 2025
  If the light on the button of your Philips Kitchen Appliances does not turn on, it could be due to a connection problem. Check if the power cord is properly connected to the multicooker and if the plug is firmly inserted into the power outlet. If the connection is fine, the light may be defective, in which case you should take the appliance to your Philips dealer or a service center authorized by Philips.
K
Kimberly LunaAug 22, 2025
How to fix rice that is too dry in Philips Kitchen Appliances?
- J
  Jamie MooreAug 23, 2025
  If your rice is too dry and not well cooked when using Philips Kitchen Appliances, add more water to the rice and cook it for a bit longer.
N
Natalie PittsAug 26, 2025
What to do if water spills out of Philips Kitchen Appliances during cooking?
- J
  jerrybennettAug 26, 2025
  If water spills out of your Philips Kitchen Appliances multicooker during cooking, ensure that you are adding water to the level indicated on the scale inside the inner pot, corresponding to the number of cups of rice used.
J
James GutierrezAug 28, 2025
Why does the display not function on my Philips Kitchen Appliances?
- J
  jessica23Aug 28, 2025
  If the display on your Philips Kitchen Appliances does not function, it could be because the multicooker is not connected to the power supply, which means the power failure backup function will not work. Alternatively, the battery for the display may have run out of power. In this case, take the appliance to your Philips dealer or a service center authorized by Philips to have the battery replaced.
S
Sarah PatrickAug 31, 2025
Why doesn't my Philips Kitchen Appliances switch to keep-warm mode?
- J
  James DavilaAug 31, 2025
  If your Philips Kitchen Appliances multicooker does not switch to the keep-warm mode automatically, it might be because you pressed the keep-warm button before pressing the start button. In this case, the multicooker will be in standby mode after cooking is finished. If this is not the case, the temperature control may be defective, and you should take the appliance to your Philips dealer or a service center authorized by Philips.
J
Jonathon MartinSep 2, 2025
How to prevent bad smell from rice cooked in Philips Kitchen Appliances?
- L
  Lisa SmithSep 2, 2025
  If your rice smells bad after cooking in Philips Kitchen Appliances, clean the inner pot with washing detergent and warm water. Also, ensure the steam vent cap, inner lid, and inner pot are thoroughly cleaned after cooking.
D
Derek GibsonSep 5, 2025
How to prevent rice from scorching in Philips Kitchen Appliances?
- V
  Veronica LawsonSep 5, 2025
  If the rice is scorched when using Philips Kitchen Appliances, rinse the rice until the water runs clear before cooking.
J
Joseph MorenoSep 7, 2025
How to select cooking function on Philips Kitchen Appliances?
- J
  Johnny MedinaSep 8, 2025
  If you cannot get to the desired cooking function on your Philips Kitchen Appliances, press the menu button repeatedly to select the desired function as shown by the indicator.
P
patriciahowellSep 12, 2025
What does error E1 mean on Philips Kitchen Appliances?
- C
  Christopher GarrettSep 12, 2025
  If an error message (E1, E2, E3, or E4) appears on the display of your Philips Kitchen Appliances, it may indicate a power failure during cooking. Take the appliance to your Philips dealer or a service center authorized by Philips.

Philips HD3137 Specifications

General

Capacity	1.8 L
Material	Plastic
Color	White
Keep Warm Function	Yes
Number of Preset Programs	5
Product Type	Rice Cooker
Non-stick Inner Pot	Yes
Steam Tray	Yes
Inner Pot Material	Aluminum

Summary

Using the Multicooker

Before First Use

Initial steps to prepare the multicooker before its first operation, including cleaning.

Cooking Rice/Pasta

Instructions for cooking rice and pasta, including water ratio and start procedures.

Baking

Guide for baking cakes in the multicooker using the 'Four' function.

Steaming

Instructions for steaming food using the multicooker's 'Vapeur' function.

Stewing/Slow Cooking

Frying

Roasting

Manual Mode

Keep-Warm Mode

Adjusting Cooking Time and Temperature

How to customize cooking time and temperature settings for various functions.

Preset Time for Delayed Cooking

Setting a timer for delayed cooking start, excluding specific modes like reheating.

Cleaning and Maintenance

Troubleshooting

Related product manuals

Preview: Philips HD3038

Preview: Philips HD3060

Preview: Philips HD3011

Preview: Philips HD3037

Preview: Philips HD3095

Preview: Philips HD3036

Preview: Philips HD3033

Preview: Philips HD3620/25

Philips HD3620/25

Philips Avance HD3060

Philips Viva HD3037/70

Preview: Philips Perfect Draft HD3620/20

Philips Perfect Draft HD3620/20

Preview: Philips Perfect Draft HD3610/50

Philips Perfect Draft HD3610/50