Philips HD8823 - Hot Water; Brewing 2 Cups of Espresso, Espresso Lungo and Coffee; Frothing Milk

Brewing 2 cups of espresso, espresso lungo and coffee
1 Place two cups under the coffee dispensing spout.
2 Press the ESPRESSO, ESPRESSO LUNGO or COFFEE button twice to
brew the selected coffee.
-
The button of the selected beverage flashes twice quickly.
The machine grinds and doses automatically the correct amount of
coffee. Brewing two cups of a beverage requires two grinding and
brewing cycles the machine carries out automatically.
3 The machine stops brewing when the preset level is reached.
Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the previously
selected beverage button.
Frothing milk
Warning: Danger of scalding! Dispensing may be preceded by small jets of
hot water. Use the appropriate protective handle only.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a
protein content of at least 3% to ensure an optimal frothing result. You can
use whole milk or semi-skimmed milk. It is also possible to use skimmed
milk, soy milk and lactose free milk.
1 Fill 1/3 of a jug with cold milk.
2x
2
1
X
X
2 Immerse the classic milk frother in the milk. Press the HOT
WATER/STEAM button twice.
-
The HOT WATER/STEAM button flashes twice.
3 Froth the milk by gently swirling the jug and moving it up and down.
1x
2
1
X
X
4 Press the HOT WATER/STEAM CLEAN button once to stop frothing.
Note: After pressing the HOT WATER/STEAM button, it takes a few
seconds before the machine stops frothing.
Note: Frothing stops after 3 minutes, press the HOT WATER/STEAM
button twice if you want to continue frothing.
5 Remove the external part of the classic milk frother and rinse it with
lukewarm tap water. Press the HOT WATER/STEAM button once and
dispense hot water for 5 seconds.
Hot water
Warning: Danger of scalding. Only grab the steam wand by its
protective handle. Dispensing may be preceded by small jets of
hot water.
16
English