Philips HD8829/09 - Circuit Priming; Automatic Rinsing Cycle

8 Press the ON/OFF button to switch on the machine.
Circuit priming
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a container under the hot water dispensing spout.
Espresso
Memo Memo
Calc
clean
Coffee
Memo
Cappuccino
2 The no water light and the general warning light flash simultaneously.
-
The ESPRESSO button light lights up.
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
Espresso
Memo
3 Press the Espresso button.
-
The machine is heating up and the ESPRESSO, CAPPUCCINO and
COFFEE buttons flash simultaneously.
Automatic rinsing cycle
When the machine has heated up, it performs an automatic rinsing cycle to
clean the internal circuit with fresh water. Water flows from the coffee spout.
1 Place a container under the coffee dispensing spout.
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
-
The ESPRESSO, CAPPUCCINO and COFFEE buttons flash
simultaneously.
-
The cycle ends automatically.
10
English