Philips HMP4000 - File browsing

10 EN
3 To switch HMP4000 to standby mode, press again on the remote control.
» The power indicator lights up red.
Auto standby
From the Home screen, go to [Setup] > [System] to switch on [Automatic
Standby]
If there is no button press or media play on HMP4000 for 15 minutes, HMP4000
switches to standby mode automatically.
Screensaver
From the Home screen, go to [Setup] > [System] to switch on [ScreenSaver
Delay].
If there is no button press or media play on HMP4000 for a selected time
duration, the screen saver is activated. To exit the screen saver, press any button on
the remote control.
Use the remote control
SwitchHMP4000onortostandbymode
• Press
Navigatebetweenscreensorthroughoptions
• Return to the Home screen
, , ,
• Navigate through options
OK
• Conrm the option
• Back one level or exit
Viewoptionsmenuformediaplayorlenavigation
• Press OPTIONS
Control the play
• Start, pause, or resume the play