Philips HMP4000 - Update software; Update software via the Internet; Update software via USB

21EN
7 Updatethefirmwarethrough
aUSBstoragedevice
Before you update the rmware, check current the rmware version of HMP4000.
On the Home screen, go to [Setup] > [SoftwareUpgrade] > [Version Info].
1 On your computer, do the following:
a Go to www.philips.com/supporttondthelatestrmware.
b Searchforyourmodelandclickon"Softwareanddrivers".
c Downloadthermwareupdateandsavetheletotheroot
directoryofaUSBstoragedevice.
2 On HMP4000, do the following:
a ConnecttheUSBstoragedevice.
b OntheHomescreen,select[Setup]>[SoftwareUpgrade]>[USB
upgrade].
» If a rmware update is detected, you are prompted to start the
update.
3 Follow onscreen instructions to complete the update.
» When the update is complete, HMP4000 switches off automatically, and
then switches on again.
Caution
• Keep HMP4000 powered on and the storage device mounted before the rmware update is
complete.