EasyManua.ls Logo

Philips HSB4352 - Audio Setup; Video Setup

Philips HSB4352
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
[Off] – enjoy surround sound with its
full dynamic range.
[On] – enjoy quiet viewing at night
(DVDs only).
Video setup
On [Video Setup Page], you can set the
following options:
[TV Type]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
[PAL] – For TV with PAL color system.
[NTSC] – For TV with NTSC color
system.
[Multi] – For TV that is compatible
with both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
[4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-
screen TV: display ratio 16:9.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
[On] – Enable the screen saver.
[Off] – Disable the screen saver.
[Sleep Timer]
Switches to standby automatically after the
preset time.
[15 mins], [30 mins], [45 mins], [60
mins] – select the count down time
before the apparatus switches to
standby.
[Off] – disable sleep mode.
[DivX(R) VOD Code]
Display the DivX® registration code.
Tip
Enter this DivX registration code when you rent or
purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
On [Audio Setup Page], you can set the
following options:
[HDMI Audio]
When you connect this apparatus and TV with
an HDMI cable, select the audio output setting
for this connection.
[On] – the sound is output through
both your TV and this apparatus. If
the audio format on the disc is not
supported, it is downmixed to two-
channel sound (Linear-PCM).
[Off] – disable audio output from the
TV. The sound is only output through
this apparatus.
English
EN

Table of Contents

Related product manuals