Philips HTB3525B - Play Audio through Bluetooth

16 EN
4 Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading
time depends on the disc and your
internet connection.
5 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
option.
Note
• To clear the memory on the storage device, press ,
select [Setup] > [Advanced] > [Clear memory].
Play audio through Bluetooth
Through Bluetooth, connect the Blu-ray
Surround Base with your Bluetooth device
(such as an iPad, iPhone, iPod touch, Android
phone, or laptop), and then you can listen to
the audio les stored on the device through
your Blu-ray Surround Base .
What you need
• A Bluetooth device which supports
Bluetooth prole A2DP, AVRCP and with
Bluetooth version as 2.1 + EDR.
• The operational range between the Blu-ray
Surround Base and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press to select Bluetooth mode.
» [BT] is displayed on the display panel.
2 On the Bluetooth device, switch on
Bluetooth, search for and select the
name of your Blu-ray Surround Base to
start connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
• If prompted for a password, enter
"0000".
3 Wait until you hear a beep sound from this
product.
» When the Bluetooth connection
succeeds, [BT_RE] is displayed on the
display panel.
» If the connection fails, [BT] on the
display panel is still displayed.