Philips HTB3525B - Audio Settings; Parental Control Settings; Display Settings; Energy Saving Settings

24 EN
Audio settings
1
Press .
2 Select [Setup], and then press OK.
3 Select [Audio], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
• [Night mode]: For quiet listening,
decrease the volume of loud sounds
on your Blu-ray Surround Base .
Night mode is only available in DVDs
and Blu-ray discs with Dolby Digital,
Dolby Digital Plus, and Dolby True HD
soundtracks.
• [HDMI Audio]: Set an audio format on
HDMI output.
• [Default sound settings]: Restore
the equalizer settings of all the sound
modes to the default values.
Parental control settings
1
Press .
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
• [Change Password]: Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
• [Parental control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Display settings
1
Press .
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel]: Set a brightness level
(100%, 70% or 40%) on the display
panel of the Blu-ray Surround Base . If
you select [Auto off], after 10 seconds
of button inactivity, the display will
automatically switch off.
• [VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
1
Press .
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
• [Screen saver]: Switch the Blu-ray
Surround Base to screen saver mode
after 10 minutes of inactivity.
• [Auto standby]: Switch the Blu-ray
Surround Base to standby after 30
minutes of inactivity. This timer works
only when a disc or USB play is paused
or stopped.
• [Sleep timer]: Set the duration of
the sleep timer so that the Blu-ray
Surround Base is switched to standby
after the specied period.