Philips HTS3000 - Remote Control

Remote Control
O©
- Turns on this unit or turns off to normal
standby mode,
@
Source buttons
DISC: switches to DISC mode.
RADIO: toggles between FM and AM/
MW band.
TV: switches to TV mode, The sound
from the TV will output through the
connected speaker system.
AUX: switches to the external device
that is connected to the AUDIO IN-AUX
socket.
(3) OPEN/CLOSE
- Opens/closes the disc tray.
(_) PROGRAM
- DISC: starts programming.
- RADIO: press and hold this button to
start automatic/manual preset
programming.
(_) REPEAT
- Selects various repeat or shuffle modes;
turns off repeat or shuffle mode,
_) SETUP
- Enters or exits the system setup menu.
_) DISPLAY
- Displays the current status or disc
information,
- Selects a different viewing angle of a DVD
movie (if available).
@ PLAY/PAUSE _1!
- DISC: starts/pauses playback.
- RADIO: starts auto radio installation for
first time setup.
(_) STOP []
- Exits an operation,
- DISC: stops playback.
- RADIO: press and hold this button to
erase the current preset radio station.
(_) TV VOL +/--
- Adjusts the volume of the TV (for Philips
TVs or compatible brands only).
®
AUDIO SYNC
Sets the audio output delay times if the
video playback is slower than the audio
output.
_) ZOOM
- Zoom in or out the picture on the TV.
(_) ANGLE
- Selects a different viewing angle of a DVD
movie (if available).
l0