Philips HTS3000 - Specifications

Specifications
AHPLIFIER
Total output power
Home Theatre mode:
Frequency Response:
Signal-to-Noise Ratio:
Input Sensitivity
- AUX in :
- TV In:
200 W
180 Hz- 18 kHz/+3 dB
> 60 dB (A-weighted)
500 mV
250 mV
RADIO
Tuning Range:
26 dB Quieting
Sensitivity:
IF Rejection Ratio:
FM 87.5M08 MHz
(50/100kHz)
AM 53 I-1602 kHz (9kHz)
AM 530-1700 kHz (10kHz)
FM 22 dBf, AM 5000pV/m
FM 60 dB, AM 24 dB
Signal-to-Noise Ratio: FM S0 dB, AM 30 dB
AM Suppression Ratio: FM 30 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
AM 5%
Frequency Response FM 180 Hz-9 kHz / +6 dB
Stereo Separation FM 26 dB (I kHz)
Stereo Threshold FM 23.5 dB
DiSC
Laser Type
Disc Diametre
Video Decoding
Video DAC
SignalSystem
Video Format
Video S/N
Composite Video
Output
Audio DAC
Frequency Response
PCM
Dolby Digital
Semiconductor
12cm / 8cm
MPEG-I / MPEG-2 /
/ DivX 3/4/5/6
12 Bits
PAL / NTSC
4:3 / 16:9
56 dB (minimum)
1.0 Vp-p, 75f_
24 Bits / 96 kHz
4 Hz-20 kHz (44.1 kHz)
4 Hz-22 kHz (48 kHz)
4 Hz-44 kHz (96 kHz)
IEC 60958
IEC 60958, IEC 61937
HAIN UNiT
Power Supply Rating: 110-240 V; 50-60 Hz
Power Consumption: 40 W
Dimensions: 360 x 48 x 332 (mm)
(wxhxd)
Weight: 2.58 kg
FRONT AND REAR SPEAKERS
System: Full range satellite
Impedance: 4
Speaker drivers: 3" full rangespeaker
Frequency response: 150 Hz - 20 I<Hz
Dimensions: 100 x 95.5 x 83.5 (mm)
(wxhxd)
Weight: 0.47 kg/each
CENTRE SPEAKER
System: Full range satellite
Impedance: 8
Speaker drivers: 3" full range speaker
Frequency response: 150 Hz - 20 kHz
Dimensions: 100 x 95.5 x 83.5 (mm)
(wxhxd)
Weight: 0.52 I<g
SUBWOOFER
Impedance: 8
Speal<er drivers: 165 mm (6.5") woofer
Frequency response: 40 Hz - 150 Hz
Dimensions: 131.2 x 315.5 x 386 (ram)
(wxhxd)
Weight: 3.60 I<g
Specifications subject to change without prior
notice.
46
I 1 hts3000 98 46
el]g2 ll]dd
200%04-26 6:54:07 PM [