[nstalllng the latest software
Periodically Philips will issue software
upgrades to enhance the user experience,
Other Features
@ Get the software version of this unit by
pressing OPEN/CLOSE _ to open the
disc compartment
O Press DISPLAY on the remote control.
Write down the information for your
current software version.
@
Visit the Philips website
'www.philips.com/support' to check the
availability of the latest software upgrade
and download the software to a CD-R.
Insert the CD-R to the disc tray.
The software starts to install on this
unit automatically.
Note:
Never unplug or turn off thisunit
during the upgrade.
When the disc compartment opens,
remove the CD-R.
The software upgrading is in process.
O Once complete, it turns off to standby
mode automatically.
Setting the Sleep timer
The sleep timer enables this unit to
switch to standby mode automatically at
a preset time.
Press SLEEP on the remote control
repeatedly to select a preset switch-off
time. (15, 30, 45, 60 minutes or OFF).
Before this unit switches to the
standby mode, a countdown of 60
seconds is displayed.
'SLEEP6O' _ %LEEP 59'....
'SLEEP I' _ 'SLEEP'
To cancel the sleep timer
@ Press SLEEP repeatedly to select _OFF'
or press the O (STANDBY-ON)
button.
41
To Next Page
Loading...
