Setup Menu Options (continued)
Audio Setup Page (underlined options are the factory default settings)
Access the speaker's level setup menu, Use 4 I_ keys to adjust
the volume level for each connected speaker between -6dB to
+6dB, See 'Getting Started - Setting the speakers' channels'.
Access the speaker's distance setup menu. Use _ _ keys to set
the delay times for the centre and rear speakers based on the
listening position and distance. See 'Getting Started - Setting
the speakers' channels'.
Note: I ms increase/decreaseof delay time is equivalent to one (I) foot
changein distance. Use the longer delay time settingswhen the rear
speakers are closer to the listener than the front speakers.
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality,
{ Off } - Turn off CD-upsampling.
{ 88.2 kHz (X2) } - To convert the sampling rate of the CDs
twice as high as the original rate.
Notes:
- If you have activated the CD upsampling feature, the audio output
automatically switches to stereo mode.
- If you press the SURROUND button on the remote cone'ol to select
multi-channel mode, it turns off the CD upsampling feature.
This feature allows you to adjust the audio delay times if the
video playback is slower than the audio output streams.
Use _t _ keys to set the delay times for the audio output
between 0_200ms.
34
To Next Page
Loading...
