Philips HTS3000 - Setting the speakers channels

Getting Started (continued)
Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
O Use AY keys to highlight { Speakers
Delay } and press _.
@
@
@
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
In disc mode, press SETUP on the
remote control.
Press _ repeatedly to select { Audio
Setup Page }.
Press Y to highlight { Speakers
Volume } and press I_,
Speakers Level Selup
@
@
Use 4 _ keys to set the delay times
(0 ms - 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
Press OK to confirm.
Helpful Hints:
-A Ires increase/decrease of delay time is
equivalent to 30 cm change in distance.
- Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
- The test tone will be automatically
generated to help you judge the sound level
of each speaker.
Use 4 ll_ keys to set the volume level for
each speaker (-6dB - +6dB) and press
OK to confirm,
22