@
Disc Operations (continued)
Programming disc tracks
(not for Picture CD/MP3 discs)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks.
Press PROGRAM on the remote
control.
....÷ The programming menu appears.
@ Use the numeric keypad (0-9) to
enter a valid track/chapter number.
@ Use ,I_AV keys to move the cursor to
the next position.
÷ If there are more than ten total
programme tracks, select _ Next } on
the screen and press OK (or press l_lon
the remote control) to access the next
programming page.
@ To remove the track/chapter fl'om the
programming menu, select the track/
chapter and press OK.
@ Once complete, select { Start } on the
screen and press OK to start playback.
...._ Playback starts from the selected track
under the programmed sequence.
@ To exit the programme menu, select
Exit } in the menu and press OK,
Other playback features
for video discs (DVD/VCD/
SVCD)
DISC MENU --
TITLE _-
SUBTITLE--
AUDIO --
DISPLAY
AUDIOSYNC
ZOOM
ANGLE
Note:
The operating features described here
might not be possible for certain discs.
Always refer to the instructions supplied
with the discs.
Depending on the disc format, a menu
may appear on the TV screen once you
load the disc.
To select a playback feature or item
Use 4 _AY keys or numeric keypad
0=9 on the remote control, then press
OK to start playback,
To access or remove the menu
Press DISC MENU on the remote
control
25
To Next Page
Loading...
