14 EN
5 Change settings
The home theatre settings are already confi gured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Note
•
You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK . To exit the menu, press
SETUP .
Language settings
Onscreen display language
1 Press SETUP .
2 Select [General Setup] and then press OK .
• [OSD Language] : Select a display
language for menu.
Disc language
1 Press SETUP .
2 Select [Preference Setup] and then press
OK .
• [Audio] : Select an audio language for
discs.
• [Subtitle] : Select a subtitle language for
discs.
• [Disc Menu] : Select a menu language for
discs.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual .
• If you select a language that is not available on a
disc, the home theatre uses the default language
of the disc.
Picture and video settings
1 Press SETUP .
2 Select [Video Setup] and then press OK .
• [TV System] : Select a video format
supported by the TV.
• [TV Display] : Select a picture format to
fi t the TV screen.
• [HDMI Setup] : [Wide Screen Format] :
For 16:9 wide screen TV display setting.
[HDMI Video] : Select the resolution of
the video signal being output from the
HDMI OUT.
• [Picture Settings] : Select colour settings
for the video display on TV.
• [HD JPEG] : Enable or disable high
defi nition picture display.
Note
•
If you change a setting, make sure that the TV
supports the new setting.
Audio settings
1 Press SETUP .
2 Select [Audio Setup] and then press OK .
• [HDMI Audio] : HDMI audio is
automatically down-mixed to two
channel for TV speakers. If you do not
want to output audio through your TV,
disable the HDMI audio.
• [Treble/Bass] : Set the high frequency
(treble) and low frequency (bass) settings
of the home theatre.
To Next Page
Loading...
