Philips HTS7201 - 7 Use Your Home Theater; Choose Sound

19
English
Sound mode
Selectpredenedsoundmodestosuityour
video or music.
1 Press SOUND SETTINGS.
2 Select SOUND, and then press OK.
3 Press the Navigation buttons (up/down) to
select a setting on the display:
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for
movies.
• MUSIC: Recreate the original recording
environment of your music, in the
studio or at a concert.
• ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
• NEWS: Hear every word with
optimized speech and clear vocals.
• GAMING: Enjoy thrilling arcade
sounds,idealforaction-packedvideo
games or loud parties.
4 Press OKtoconrm.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SOUND SETTINGS.
2 Select SURROUND, and then press OK.
3 Press the Navigation buttons (up/down) to
select the following settings:
• AUTO: Surround sound based on the
audio stream.
• V SURR: Virtual Surround.
• STEREO:Two-channelstereosound.
Ideal for listening to music.
4 Press OKtoconrm.
Equalizer
Changethehighfrequency(treble),mid
frequency(mid),andlowfrequency(bass)
settings of the home theater.
1 Press SOUND SETTINGS.
2 Select TREBLE, MID or BASS, and then
press OK.
3 Press the Navigation buttons (up/down) to
changethefrequency.
4 Press OKtoconrm.
7 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
inthequickstartguideandtheonscreen
help.
• Completetherst-timesetup.First-time
setup appears when you turn on the home
theaterforthersttime.Ifyoudonot
complete the setup, you are prompted
to complete it each time you turn on the
home theater.
• Switch the TV to the correct source for the
home theater.
Choose sound
This section helps you choose the ideal sound for
your video or music.
1 Press SOUND SETTINGS.
2 Press the Navigation buttons (left/ right) to
access the sound options on the display.
Sound settings Description
SOUND Select a sound mode.
SURROUND Select surround sound or
stereo sound.
TREBLE Changethehighfrequency
output.
MID Changethemiddlefrequency
output.
BASS Changethelowfrequency
output.
AUD SYNC Delay the audio to match the
video.
3 Select an option, and then press OK.
4 Press BACK to exit.
If you do not press a button within a
minute, the menu exits automatically.
EN