Philips HTS7201 - Update Software through USB

38
Step 2: Update the software
Caution
•
BeforeyouconnecttheUSBashdriveto
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1 ConnecttheUSBashdrivetoyourhome
theater.
2 Switch your TV to the correct source for
your home theater.
3 Press (Home), and then select [Setup].
4 Select [Advanced] > [Software Update] >
[USB].
5 Follow the instructions on the TV to
conrmtheupdate.
» When the software update is complete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds, and
then reconnect it.
Note
•
When the software update is in progress, do
not turn off the power or remove the USB
ashdrive.
Update software through USB
What you need
• AUSBashdrive,withatleast75MBof
memory.TheUSBashdrivemustbeFAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Download the latest software
1 ConnectaUSBashdrivetoyour
computer.
2 In your web browser, go to www.philips.
com/support.
3 AtthePhilipsSupportwebsite,ndyour
product and locate the Software and
drivers.
» The software update is available as a zip
le.
4 Savethezipleintherootdirectoryof
yourUSBashdrive.
5 Use the archive utility to extract the
softwareupdateleintherootdirectoryof
theUSBashdrive.
» ThelesareextractedundertheUPG_
ALL folderofyourUSBashdrive.
6 DisconnecttheUSBashdrivefromyour
computer.
EN