Philips HU4805 - Removing scale; Cleaning the filter; Disinfecting the reservoir

10
EN
Note
• If no preset humidity level is selected,
the humidier will stop working when
the humidity level reaches 50RH% in the
auto mode and 70RH% in (low),
(normal) or (high) mode.
Water level
When there is not enough water in the
reservoir:
• The red indicator light starts
blinking (g. f).
• The humidier will stay on for
30 minutes and then turns o, and
the red indicator light remains on.
You can turn the humidier back on
after relling water into the reservoir.
Note
• If the reservoir is empty when the
humidier is plugged in and turned
on, the red indicator light blinks for
2 minutes and then remains on before
the reservoir is relled with water.
• It is normal to nd some water left in the
reservoir.
Relling reservoir
Water level can be seen through the
transparent reservoir window.
1 Turn o the humidier and remove
the plug from the electrical outlet.
2 Remove the upper unit by holding it
at both sides (g. c).
3 Pour out any remaining water, rinse
reservoir, wipe clean and dry with a
clean cloth or paper towel.
4 Rell reservoir with cold tap
water until the water reaches the
maximum water indication level
(g. d). Do not overll.
Setting the timer
With the timer function, the humidier
can operate for a set number of hours.
When the set time has elapsed, the
humidier automatically turns o.
1 Press the timer button once or
more times to choose the number
of hours you want the humidier to
operate (g. k).
» The corresponding timer light
(1H, 4H or 8H) goes on.
To deactivate the timer function, press
the timer button repeatedly until the
timer light turns o.
Setting the humidity level
Note
• Make sure that the reservoir is lled
with water before turning it on. (see the
chapter 'Get started', section 'Prepare for
humidication').
1 Press the humidity button one
or more times to set the desired
air humidity to 40RH%, 50RH% or
60RH% (g. l).
» The humidity light (40, 50 or 60)
of the humidity level goes on.
» The humidity level of the
surrounding air displays on the
center of the control panel.
Tip
• A comfortable humidity level is from
40RH% to 60RH%. You can choose
the preferred humidity level at 40%RH,
50%RH or 60%RH.