Philips HU4813 - Filter Replacement Guide; Filter Replacement Process and Tips

10
EN
6 Replacing the
humidification
filter
Replace the humidication lter every
three months for optimal performance.
If the lter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidication
lter at least once a year.
Note
• Use only Philips original humidication
lter HU4102.
• Always unplug the humidier before you
replace the humidication lter.
Tip
• Register your product at
www.philips.com for further information
on how to replace your lter.
1 Take out the humidication lter
and the lter support from the water
tank (g. l).
2 Remove the humidication lter
from the lter support (g. m).
3 Remove the packaging material
from the new humidication lter
(g. r).
4 Assemble the new humidication
lter around the lter support
(g. p).
5 Put the lter and the lter support
back into the water tank (g. q).
6 Put the upper unit back onto the
water tank (g. d).
Tip
• You can easily nd more information
about how to replace the lter in our
web page or by calling our Consumer
Care Center.