40
EN
Advanced Settings
2. Enter the Master PIN when prompted and press mOK to confirm.
3. Scroll
: to Barring Number and press mSELECT.
4. Scroll
: to Number 1, Number 2, Number 3 or Number 4 and press mSELECT.
5. Enter a maximum of 4 digits and press
mOK to confirm.
A validation tone is emitted and the screen returns to previous menu.
Baby Call
When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This
feature is very useful for direct access to emergency services.
To activate Baby Call mode
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Press
mSELECT to enter Mode.
4. Scroll
: to On and press mSELECT to confirm.
5. Enter the Baby Call number and press
mOK to confirm.
A validation tone is emitted.
To deactivate Baby Call mode
1. Long press mMENU (when Baby Call mode has been activated before).
2. Scroll
: to Off and press mSELECT to confirm.
To change Baby Call number
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
The default Master PIN number is 0000.
If a restricted number is dialled, the call will not be connected. When this happens, the phone emits
an error tone and returns to stand-by mode.
You can enter up to 20 digits for baby call number.
The default Master PIN number is 0000.
The default Master PIN number is 0000.
ID937_IFU_EN_US.book Page 40 Thursday, February 8, 2007 4:16 PM
To Next Page
Loading...
