44
EN
Advanced Settings
Demo Mode
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Demo Mode and
press
mSELECT.
2. Press
mSELECT to start the demo mode.
The demo mode begins.
3. To exit from this mode, press e.
1st Ring
When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in
countries where calling line identity is sent after the first ring, so no phones in the house would ring when a
message arrives.
To set 1st Ring
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Set 1st Ring and press
mSELECT.
2. Scroll
: to On or Off and press mSELECT to confirm.
ID937_IFU_EN_US.book Page 44 Thursday, February 8, 2007 4:16 PM
To Next Page
Loading...
