Mounting Luminaire 9
SL STRIP 400 RGBW LED Luminaires Installation & User’s Manual
Sh wline
4. Mounting Luminaire
The SL STRIP 400 RGBW LED Luminaire is provided with two mounts and multiple safety cable anchor points
(as and Figure 7 on page 10.)described in "Major Luminaire Components" on page 4
The two mounts are easily removed and reversed as required (as illustrated in Figure 6). These mounts are designed
to accept a variety of mounting hooks, clamps, etc. for hanging applications or can be set on the mounts for floor
applications. Refer to Figure 7 for additional information.
Figure 6: Mount Removal and Installation
Simply attach hook, clamp, etc. to the SL STRIP 400 RGBW LED Luminaire mount assembly in the M10 hole.
OR
OR
Mount (x1) *
M3 Mount Screw (x2) *
Luminaire
M6 Mount Screw (x2) *
(* Per Side)
To Next Page
Loading...
